固件更新日志——稳定版 V1.2.6
扩展可超频的矿机型号：
--> 新增支持的 Antminer 机型：
- T19 Pro Hydro, S19j XP, S19e XP Hydro, S19 Pro Hydro (120 chips)
- S21 XP, S21+, S21+ Hydro, S21 Immersion, S21 Pro,
- S21 XP Hydro, S21 XP Immersion, T21 with Xilinx and L9
- S19 XP: BHB56802
- S21 Hydro: HHB68601, HHB68502, HHB68503
- T21: BHB68701-
- S21: BHB68606, BHB68603P, BHB68603-
新功能与优化内容：
-
新增 编辑调校预设参数 的功能
-
仪表盘支持中文语言界面
-
新增 电力消耗详情图表
-
对于不支持 PSU 电量监测的机型，现在可以通过预设显示矿机及算力板的功耗
-
针对 Antminer S19 Pro Hydro 和 S19 Pro Plus Hydro，新增水温小组件（进水/出水温度）
-
矿机初始化时增加短暂暂停，优化启动流程
-
支持 PSU 电源温度监测
-
当出现重复的 “链路中断检测（Chain Break Detected）” 错误时，系统将自动重新调校预设
-
新增 完整的错误系统，包含详细的错误代码说明
-
针对 Antminer T21，更新电压上限范围
-
针对无 PIC 控制器的机型，出现任意链路错误将自动关机保护
-
图表数据现在在重启后依然保留
-
修复了导致矿机异常崩溃的问题
新增配置选项：
1、预设切换选项：
-
可选择忽略风扇转速
-
根据温度自动降低使用的最高预设
-
适用于 x21 系列（不包含 S21 Pro）
-
可选择忽略芯片温度传感器（适用于 Antminer L9、S21、T21、S21 Imm、S21 Hydro）
-
可选择跳过损坏的温度传感器
-
可配置挖矿启动前的延迟时间（减少启动时的功率冲击）
-
可配置启动挖矿所需的最小正常工作算力板数量
Bug 修复：
-
修复了偶发的 EEPROM 数据损坏 问题
-
修复了因异常关机导致的 矿池配置丢失 问题
-
修复了 错误处理机制导致仪表盘卡顿 的问题
-
修复了 浸没式冷却模式意外重置为自动模式 的问题
废弃功能：
-
移除“Hotel Pool 和 Fees”标签页
预设与温控控制优化：
-
预设切换温度阈值已更新：
-
上升触发（RISE）：85°C
-
降档触发（DECREASE）：90°C
-
-
新增预设支持的机型：Antminer S19j Pro+, S19a, S19 XP, S21
-
修正以下机型的预设参数：Antminer S19e XP Hydro, S19 (76 chips), S19j Pro, S19 Pro+ Hydro, L7 and S19i
风扇和散热增强功能：
- 在自动模式下新增 风扇最高转速限制
- 暂停期间风扇最低转速降低至 0%，进一步降低噪音和能耗
- 在预设上升时，风扇最高转速提升至 90%，增强散热能力
- 根据温度优化了 风扇控制逻辑，提升散热效率与响应速度
配置与系统行为优化：
-
重启设置：最大重启尝试次数（Max Restart Attempts）默认值现在为禁用（0）
-
时区设置：
-
新增对 Cvitek 芯片的时区处理支持
-
更改时区后现在需要完全重启矿机才能生效
-
-
EEPROM 读取：除了 XIL 芯片外，所有算力板的 EEPROM 读取速度均已加快
-
默认支持：对于没有 EEPROM 的矿机，系统会自动分配默认 board_model
-
日志功能：
-
Cvitek 芯片的日志在重启后不再保留
-
在过热事件中，日志中将显示具体芯片 ID
-
用户体验（UX）与界面优化：
-
仪表盘在首次启动时会自动检测系统/浏览器语言
-
多项界面与用户体验细节优化，提升操作流畅性与易用性
稳定性、性能与安全性：
-
自动切换器（autoswitcher）和自动调频（autotune）性能提升
-
系统整体稳定性增强
-
固件安全性加强，提升防护能力
-
电源兼容性优化，更好支持多种电源型号
-
为 Web 管理界面新增 暴力破解保护机制，防止密码被猜解
API 更新：
-
出厂信息接口增强：
-
新增字段：has_pics（是否有PIC控制器）、psu_model（电源型号）、psu_serial（电源序列号）
-
-
新增 API 字段：
-
summary：新增hr_nominal（理论算力）
-
info：新增build_uuid、build_name
-
metrics：新增power_consumption（功耗）
-
chips：新增throttled字段（是否被降频）
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Changelog STABLE 1.2.6:
Expanded Miner Support
• Newly Antminer supported models:
• T19 Pro Hydro, S19j XP, S19e XP Hydro, S19 Pro Hydro (120 chips)
• S21 XP, S21+, S21+ Hydro, S21 Immersion, S21 Pro,
• S21 XP Hydro, S21 XP Immersion, T21 with Xilinx and L9
• Antminer submodel support added for:
• S19 XP: BHB56802
• S21 Hydro: HHB68601, HHB68502, HHB68503
• T21: BHB68701-
• S21: BHB68606, BHB68603P, BHB68603-
New Features & Enhancements
• Added ability to edit tuned presets
• Chinese language now available in dashboard
• New detailed graph for power consumption
• Shows miner consumption and hashboards from presets (for models without PSU consumption reporting)
• Water temperature widget for Antminer S19 Pro Hydro and S19 Pro Plus Hydro (inlet/outlet)
• Miner Initialization: Quick pause during initialization
• PSU temperature monitoring support
• Automatic preset retuning after repeated “Chain Break Detected” errors
• Comprehensive error system with detailed error codes
• Updated voltage limits for Antminer T21
• Automatic shutdown on any chain error for models without PIC controllers
• Charts now persist after reboot
• Resolved unexpected miner crash
New Configuration Options
• Preset Switcher options:
• Ignore fan speed and Auto-lower top preset based on temperature
• Chip Throttling: Available for x21 series (excluding S21 Pro)
• Sensor Handling:
• Option to ignore chip temperature sensors (Antminer L9, Antminer S21, Antminer T21, Antminer S21 Imm, Antminer S21 Hydro)
• Option to skip broken temperature sensors
• Startup Control:
• Configurable delay before mining starts (reduces startup power spikes)
• Configurable minimum number of operational boards required to start mining
Bug Fixes
• Fixed occasional EEPROM corruption
• Fixed issue with pool configuration loss on abrupt shutdown
• Fixed dashboard freezing caused by error handling
• Fixed immersion mode unexpectedly resetting to auto
Deprecated Features
• Removed Hotel Pool and Fees tab
Preset & Temperature Control Improvements
• Preset Switcher thresholds updated: RISE at 85 °C and DECREASE at 90 °C
• New presets added for: Antminer S19j Pro+, S19a, S19 XP, S21
• Corrected presets for: Antminer S19e XP Hydro, S19 (76 chips), S19j Pro, S19 Pro+ Hydro, L7 and S19i
Fan & Cooling Enhancements
• Added maximum fan speed limit for auto mode
• Reduced minimum fan speed during pause to 0%
• Increased maximum fan speed to 90% during preset increase
• Improved fan control logic based on temperature
Configuration & System Behavior
• Restart Configs: Max Restart Attempts now defaults to disabled (0)
• TimeZone:
• Added time zone handling for Cvitek
• Full reboot now required when changing time zone
• EEPROM Reading: Accelerated on all boards except XIL
• Default Support: Default board_model assigned for miners without EEPROM
• Logging:
• Logs not saved after reboot on Cvitek boards
• Chip ID shown in logs during overheat events
User Experience (UX) & UI Improvements
• Dashboard now auto-detects system/browser language at first launch
• Various UI and UX enhancements for improved usability
Stability, Performance & Security
• Improved autoswitcher and autotune performance
• General system stability improvements
• Strengthened firmware security
• Improved PSU compatibility across supported models
• Added brute-force protection for web interface passwords
API Changes
• Factory Info Enhancements: Added has_pics, psu_model, and psu_serial to response
• New API Fields:
• summary: includes hr_nominal (theoretical hashrate)
• info: includes build_uuid, build_name
• metrics: includes power_consumption
• chips: includes throttled field